Floods or heavy rains as the most feared thing for everyone, not least for vehicle owners, especially cars. So based on that car maintenance when the rain trend must be more extra.
It can be imagined if the four-wheeled vehicle has to pass through a road full of puddles due to rain or the severity of being in a flooded condition. It is not impossible that the car engine will suffer damage and even die.
Generally, the water that enters the car can be through the exhaust, dashboard, gap under the car, and others. The thing is a big thing when the water has entered the engine of a four-wheeled vehicle.
If in such conditions you should not start or start the engine of a four-wheeled vehicle when you know that the four-wheeled vehicle is flooded, because it can cause water hammer.
Water harmmer is a condition in which water entering the combustion chamber causes enormous pressure in the engine room due to water confined to the engine.
If permanently forced to start the engine when the vehicle is four-wheeled in such conditions, it is not possible that the car engine becomes damaged & wants to inevitably have to take it to the workshop.
Then how to deal with a car that enters water? Here are some tips that can be done so that the engine of a non-driving vehicle is increasingly damaged when entering the water. Do Not Start the Machine
The first step that must be done when a four-wheeled vehicle enters water is to use nir to start the engine of a four-wheeled vehicle. You should move the car to a site that is free based on floods or dry lockers by pushing it.
This is to prevent the onset of short currents or short circuit in the electrical system. We never understand whether water has entered the engine to the combustion chamber or not.
Forcing the engine to start when water enters the car is dangerous. In addition to causing a short circuit, incoming water can damage other engine components as a result of the losses incurred are also not a little. Turn off the Engine Power Source
The next way when the car enters the water is to immediately turn off the origin of the engine electricity. As is known, a four-wheeled vehicle has a power source that comes from the battery and is connected using engine components.
If you do not immediately unplug the battery cable, in the condition of wet wiring it can cause a short circuit in the car. The removal of the car battery cable is also indiscriminate.
First of all make sure that the four-wheeled vehicle is in a dry locker first. Then check whether the engine of the four-wheeled vehicle is mainly a battery in wet or non-winded conditions. If wet it’s good to dry the battery first using a dry cloth before unplugging the battery cable. Drying the Fireplace Section
A four-wheeled vehicle is equipped using a furnace system that is generally composed of several components such as air filters, spark plugs, alternators, coils, carburetors, and cable delco. If a four-wheeled vehicle enters water or is even submerged in the impact of flooding, these parts are often damaged.
It is important to dry the fireplace so that it does not get damaged. Check if the components of the fireplace are in good condition as a result of which later the vehicle will not suffer severe damage and the engine can still be started.
And conversely, if the car engine dies until it causes a break-down, it can be ascertained if the four-wheeled vehicle must receive extra care. If so, immediately take the four-wheeled vehicle to the official workshop because the fireplace is a very sensitive component. Change Engine Oil
The oil in the car engine should indeed be replaced at least once every 6 months to maximize engine performance. However, if the four-wheeled vehicle enters water, the oil should also be permanently replaced.
This is because the engine oil has mixed with water and if left the compounds contained in the oil can inhibit the car engine because the oil lubricant power has been lost.
The impact of the car engine is getting faster and faster to experience wear and tear, resulting in faster heat impact carving.
It’s best to drain & dispose of car oil and keep the bolts open until the oil on the engine is completely out. If the oil does not come out at all, insert the new engine oil into the engine.
It is important to note, this oil change is not too crucial if the height of the water entering the four-wheeled vehicle is not more than 30 centimeters. But if the water has entered through the oil dipstik, then the engine oil must be replaced.
To find out whether the oil has been polluted with water or not by looking at the hue of the oil. Engine oil will change as white when it has been mixed using water. Drain the Gas Tank
Draining the gas tank must be done if the four-wheeled vehicle is in a flooded condition.
In such conditions, there is a possibility that gasoline has been mixed with water. This draining is also done to prevent the emergence of oxidation substances in the gas tank.
Gasoline that has been mixed with water can damage the ignition performance of the car engine. If left for a long time, akbar may occur a leak in the gas tank impact of the pioneering. Don’t Forget to Check the Interior of the Car
Busy with the affairs of engines & spare parts of four-wheeled vehicles, remember to investigate the interior requirements of four-wheeled vehicles. Under certain conditions water is able to enter the part of the car through narrow gaps and mini four-wheeled vehicles.
Inspection can start from the carpet, doors, chairs, dashboard to the bottom of the seat. Checking must be done thoroughly, especially for cars that are submerged by floods.
As an initial stage, clean stains or mud using clean water and try to dry it using solar donation to prevent the onset of fungi and musty odors. For results that aporisma can use vaccum or suction device to remove the water that is still left in the four-wheeled vehicle. Take it to the workshop
The condition of the car that enters the water is certainly bhineka. Not only that, the type of four-wheeled vehicle also affects the amount of damage caused by water entry, especially if it is a flood.
One of the last ways that can be done is to use taking a four-wheeled vehicle to the nearest workshop. This method does not only apply in cars that are completely broken down and cannot be started even though they have followed the above methods, but also for four-wheeled vehicles that enter water even though it is not too severe condition.
This is to prevent if there are components in the machine that are still damaged as a result need to be repaired immediately. This step is done so that the car engine does not suffer more severe damage.
Keep in mind that there are car components that must be routinely replaced so as not to cause damage. This you need to pay attention to, because it can trigger other damage if the car gets into the water.