Functions and Signs of Car Tie Rod Damage that Need to Be Known

Posted on

Tie rod on the steering system plays a very crucial role so that the mount can drive using stable and easy to control. The tie rod of the car is located between the steering gearbox (steering rack) using the front wheel knuckle and as a link between the two.

The shape and name of the car’s own tie rod depends on the steering system used. In a steering system that uses a steering rack, it will be known 2 kinds of tie rods; rack end (ling tie rod) & tie rod end.

Long tie rods are installed & connected at the end of the steering rack, while make the tie rod end installed & connected using knuckle the car wheel site is located. Both of these tie rods have a very important function for the steering system. Then, what exactly is the function of the car tie rod on this steering system? Here Garasi.id explain based on the origin that was collected. Move the steering wheel to the front wheel

The first function of the tie rod is to pass the steering wheel to the front wheel. The twisting motion on the steering wheel made by the driver when turning the steering wheel, will flow towards the steering gear box and change as an interesting or pushing movement.

This movement is then continued by the car’s tie rod to pull or push part of the front wheel so that the front wheel can shift direction and turn synchronously using the direction of the steering wheel rotation. Set the front wheel distance

Also Read:  Replace New Tires in the Car, Good to Install in front or rear?

Toe itself is divided into two; Toe-in & Toe-out. This toe serves to regulate so that the front wheels can rotate straight and stable, but it can also prevent uneven wear in the tires. This toe arrangement can be done in the connection between the long tie rod and the tie rod end, which uses threaded extensions between the car’s long tie rod and the tie rod end in order to get the expected toe angle. Vibration reducer

The function of the tie rod of the last four-wheeled vehicle is to reduce vibrations based on the wheels so that they do not get to the steering wheel (steering wheel). Yes, as we already know that the long tie rod and tie rod end is a ball joint that can work in several directions.

This ball joint will break the movement up and down and right and go according to the wheel so that the movement does not spread to the steering wheel. Long tie rod (rack end) will dampen the vibration of the wheel up & down, while the tie rod end serves to dampen vibrations to the right & to the left that occurs in the wheel.

That way, the wheel can be free to move but does not interfere with the function of the steering system so that the steering wheel can be fully controlled easily and comfortably.

Along with use, the car’s tie rod components will certainly experience a decrease in performance. Symptoms caused by tie rod damage can actually be felt and known to the rider either normal running time or at low speeds. What are the symptoms? Let’s look at the lighting below. Steering time vibration deflected

Also Read:  Car Front Wheels Sound When Turning – OtomoTrip

Damage in the car tie rod you can feel when you will turn the steering wheel. This vibration will be strongly felt in your hand holding the steering wheel. This is because the car tie rod nodes experience wear so that vibrations according to the wheels can be overcome. Sounds on the legs of four-wheeled vehicles

When the knots of the car’s tie rod begin to wear out, then a slight vibration in the wheels alone can cause annoying sounds in the legs. Indeed, this sound can mean other damage. But if it sounds when the tire turns there may be damage in the tie rod. Straight steering

Another feature according to the tie rod damage of other four-wheeled vehicles is that cars often throw one-way errors. This is caused because the tires of four-wheeled vehicles rotate to the right-left with a fairly large angle. So there is the potential for four-wheeled vehicle tires to turn themselves into one-way errors even though they are not felt. This can be felt when you walk straight, if generally the car can be in a straight but this time the convoy of four-wheeled vehicles is slightly off the mark. This can be caused due to damage to the tie rod of a four-wheeled vehicle that has been quite severe.

Well, that’s what you need to know about the problem of broken four-wheeled vehicle tie rods and their characteristics. If you find the above indications in the car, it would be nice to immediately bring a four-wheeled vehicle to the workshop. Check the legs of the four-wheeled vehicle so that the car runs normally and disturbing sounds can be resolved immediately.

Leave a Reply

Your email address will not be published.